DeLorenzo
Educational equipment for technical and vocational training
Educational Equipment· Italia· 13 products in 4 families
De Lorenzo S.p.A. is an Italian company based in Milan, established in 1951. It designs, develops and produces equipment for technical and vocational training, with all training material manufactured in Italy, and is present in more than 140 countries.
Official representation of DeLorenzo for the Educational Equipment division. Distribution and support by INDUTECSA across Colombia, the United States and Latin America.
Request a quoteRenewable energies (7)
Energy efficiency, photovoltaic, wind and solar thermal.
DL OG11 Single-Stage Compressor
SKU delorenzo-DLOG11
System designed to study the operating characteristics of a single-stage reciprocating volumetric compressor and its application ranges. It works together with supervisory software installed on a desktop computer, connected via a USB 2.0 cable, that monitors 12 types of parameters (angle, pressure, flow, among others) and logs historical data with graphs. Possible experiments include determining the compression ratio, measuring efficiency, the Q-p characteristic at variable rpm, pressure-loss and the PV cycle. It includes instruments for measuring flow rate, rotational speed, torque and pressure, and is also set up for current and voltage measurement.
DL WIND-A2 Advanced Wind Energy Trainer
SKU delorenzo-DL-WIND-A2
Modular trainer for the theoretical and practical study of electricity generation from a micro-grid wind turbine. It allows the characteristics of a wind turbine generator to be determined, its off-grid operation studied with a battery charge regulator, and its on-grid operation studied as well. It includes exercises in system sizing, efficiency calculation, grid-failure response and energy balance, and is supplied with software developed in LabVIEW.
DL LSM-AV Air Conditioner/Fan Energy Efficiency Trainer
SKU delorenzo-DLLSMAV
Trainer built to simulate the operating conditions of air-conditioning and fan installations and study the system's energy efficiency under different conditions and components. The student selects which motor (conventional or high-efficiency) to couple to the load, driven by a frequency converter, soft starter or direct start, with the multifunction energy meter communicating with the PLC over the Modbus protocol and displayed in SCADA supervisory software. It includes a centrifugal and an axial fan in a Y configuration, a PLC-controlled electric damper, an airflow transducer, and a complete air-conditioning system with a hermetic piston compressor and a SCROLL compressor (20,000 BTU) controlled by a frequency converter. It allows studying motor efficiency from 0 to 120% load, comparing direct/soft/frequency-converter starting, and generating the air-conditioning system's COP.
DL LSM-C Air Compressor Energy Efficiency Trainer
SKU delorenzo-DLLSMC
Trainer built to simulate the operating conditions of air compressors and study the system's energy efficiency under different conditions and components. The student selects which motor (conventional or high-efficiency) to couple to the load, driven by a frequency converter, soft starter or direct start, controlled by SCADA supervisory software via a PLC and the Modbus/Ethernet protocol. The load system is a two-piston air compressor coupled by pulleys and V-belts, and the air piping simulates pressure-loss through 5 orifices of different diameters, selectable via solenoid valves. Each motor has a PT-100 temperature sensor on its housing and windings. It allows studying motor efficiency from 0 to 120% load and generating characteristic curves of the main devices.
DL THERMO-A12 Solar Thermal Energy Trainer
SKU delorenzo-DLTHERMOA12
Educational system for the theoretical and practical study of solar energy installations used for domestic hot water, air conditioning and similar services. It is a forced-circulation system with a wide range of educational applications, including six temperature sensors at four different points and a solar-irradiation sensor to calculate energy. It is made up of four operating units: a main module (liquid circulation, storage and control, with a control panel, block diagram and LCD display), two solar panels (one real and one simulator powered from the electrical grid), and a convector heater for experimenting with the hot water produced. It includes connection cables, an experiment manual, and software for acquiring and processing data from the solar controller.
DL SOLAR-PV Photovoltaic Solar Panel Measurement Trainer
SKU delorenzo-DL-SOLAR-PV
Educational system for the theoretical and practical study of photovoltaic solar panels. It allows indoor and outdoor experiments to determine and measure the characteristics of different types of photovoltaic panels and their connections: short-circuit current, open-circuit voltage, maximum power point, efficiency, comparison between panel types, and series and parallel connections. It includes connection cables, instruments and an experiment manual.
DL TM12 Solar Thermal Plant Simulator
SKU delorenzo-DLTM12
Educational system for the theoretical study of solar systems used for domestic hot water, air conditioning and other civil applications. The simulator allows up to six temperature probes at different points in the circuit and a solar-radiation sensor to calculate absorbed energy. It is made up of three operating units: the primary circuit (circulating liquid from the collector that heats the storage tank), the solar thermal collector (with two temperature probes for hot and cold liquid and a light sensor that detects solar radiation), and the secondary domestic-hot-water circuit (with sensors in the tank's hot side, cold side, and water inlet and outlet). Displays and LED bars show the temperature values, and it includes a manual with exercises and solar thermal energy theory.
Electronics (3)
Power supplies and computer technology.
DL FPGA-ALTERA Field-Programmable Gate Array Trainer
SKU delorenzo-DLFPGA
Multifunction training kit for teaching EDA (electronic design automation), course design and university graduation projects. It has a dual-board structure (main board plus core board) with every I/O pin configurable, suitable for anything from simple digital-circuit experiments to the most complex. It supports logic-design experiments (adders, counters, state machines, shift registers), standalone design (LED, buzzer, displays, keypad, EEPROM, VGA, RS232, PS/2, infrared, AD/DA), DSP design (vector multiplier, FFT), SOPC integrated design (audio, digital clock, SD card, USB, network), and design with the uCOS II operating system.
DL ARM32BIT-HP Open Microprocessor Trainer
SKU delorenzo-DLARM32BIT
Trainer designed to teach the fundamentals of working with a 32-bit industrial microprocessor based on Dual ARM Cortex-A7 and/or Cortex-M4 architecture, ideal for learning software and hardware development for industrial control systems and understanding ARM Cortex microprocessors and their programming. The DL ARM32BIT-HP module goes deeper into the STM32MP1 peripherals and the Linux operating system, supporting Linux C programming experiments, TF-A/Uboot/Linux kernel porting, and LED/key/LCD/IIC/RTC/SPI/RS232/USB/audio/network/ADC/DAC driver experiments under Linux.
DL 1004 Power Supply
SKU delorenzo-DL1004
Power supply designed for electronics laboratories. Its main purpose is to provide a power source with high safety specifications and exceptional electrical performance. The output connection terminals are a non-detachable type, and the outputs are protected by a differential magneto-thermal switch.
Mechanics (2)
Mechanical assembly and mechanical physical phenomena.
DL ST033 Beam and Frame Training System with Dynamometers
SKU delorenzo-DLST033
Modular training system for studying theoretical-practical beam and frame assemblies, measuring with two electronic dynamometers and graphically displaying applied force values on a PC. The structure under test is fixed with steel connectors, easily removed with an Allen key. Activities include studying hardware and fastener support, metrology measurement practice, superposition studies, deflection of beams supported at one or two points, frame deformation, and comparing calculated versus measured deformations. It includes U- and V-type portal frame structures, a continuous-beam structure, and two dynamometric gauges with a USB port, plus software and an exercise manual.
DL 13003-02 Mechanical Assembly Practice Training System
SKU delorenzo-DL13003-02
This system lets students evaluate, after each assembly and disassembly, a set of shafts and bearings driven by belts, gears and toothed pulleys, powered by a three-phase motor whose variable speed produces different levels of vibration; vibration intensity is measured on all three axes. Educational activities include pulley and bearing assembly and disassembly, shaft alignment, mechanical-transmission calculations, motor-torque and resistive-torque measurements, energy-efficiency measurements, vibration measurements in three planes at different speeds, and vibration measurements with an inertia disc.
Electrical machines (1)
View all equipment (13)
DL OG11 Single-Stage Compressor
SKU delorenzo-DLOG11
System designed to study the operating characteristics of a single-stage reciprocating volumetric compressor and its application ranges. It works together with supervisory software installed on a desktop computer, connected via a USB 2.0 cable, that monitors 12 types of parameters (angle, pressure, flow, among others) and logs historical data with graphs. Possible experiments include determining the compression ratio, measuring efficiency, the Q-p characteristic at variable rpm, pressure-loss and the PV cycle. It includes instruments for measuring flow rate, rotational speed, torque and pressure, and is also set up for current and voltage measurement.
DL WIND-A2 Advanced Wind Energy Trainer
SKU delorenzo-DL-WIND-A2
Modular trainer for the theoretical and practical study of electricity generation from a micro-grid wind turbine. It allows the characteristics of a wind turbine generator to be determined, its off-grid operation studied with a battery charge regulator, and its on-grid operation studied as well. It includes exercises in system sizing, efficiency calculation, grid-failure response and energy balance, and is supplied with software developed in LabVIEW.
DL LSM-AV Air Conditioner/Fan Energy Efficiency Trainer
SKU delorenzo-DLLSMAV
Trainer built to simulate the operating conditions of air-conditioning and fan installations and study the system's energy efficiency under different conditions and components. The student selects which motor (conventional or high-efficiency) to couple to the load, driven by a frequency converter, soft starter or direct start, with the multifunction energy meter communicating with the PLC over the Modbus protocol and displayed in SCADA supervisory software. It includes a centrifugal and an axial fan in a Y configuration, a PLC-controlled electric damper, an airflow transducer, and a complete air-conditioning system with a hermetic piston compressor and a SCROLL compressor (20,000 BTU) controlled by a frequency converter. It allows studying motor efficiency from 0 to 120% load, comparing direct/soft/frequency-converter starting, and generating the air-conditioning system's COP.
DL LSM-C Air Compressor Energy Efficiency Trainer
SKU delorenzo-DLLSMC
Trainer built to simulate the operating conditions of air compressors and study the system's energy efficiency under different conditions and components. The student selects which motor (conventional or high-efficiency) to couple to the load, driven by a frequency converter, soft starter or direct start, controlled by SCADA supervisory software via a PLC and the Modbus/Ethernet protocol. The load system is a two-piston air compressor coupled by pulleys and V-belts, and the air piping simulates pressure-loss through 5 orifices of different diameters, selectable via solenoid valves. Each motor has a PT-100 temperature sensor on its housing and windings. It allows studying motor efficiency from 0 to 120% load and generating characteristic curves of the main devices.
DL THERMO-A12 Solar Thermal Energy Trainer
SKU delorenzo-DLTHERMOA12
Educational system for the theoretical and practical study of solar energy installations used for domestic hot water, air conditioning and similar services. It is a forced-circulation system with a wide range of educational applications, including six temperature sensors at four different points and a solar-irradiation sensor to calculate energy. It is made up of four operating units: a main module (liquid circulation, storage and control, with a control panel, block diagram and LCD display), two solar panels (one real and one simulator powered from the electrical grid), and a convector heater for experimenting with the hot water produced. It includes connection cables, an experiment manual, and software for acquiring and processing data from the solar controller.
DL FPGA-ALTERA Field-Programmable Gate Array Trainer
SKU delorenzo-DLFPGA
Multifunction training kit for teaching EDA (electronic design automation), course design and university graduation projects. It has a dual-board structure (main board plus core board) with every I/O pin configurable, suitable for anything from simple digital-circuit experiments to the most complex. It supports logic-design experiments (adders, counters, state machines, shift registers), standalone design (LED, buzzer, displays, keypad, EEPROM, VGA, RS232, PS/2, infrared, AD/DA), DSP design (vector multiplier, FFT), SOPC integrated design (audio, digital clock, SD card, USB, network), and design with the uCOS II operating system.
DL SOLAR-PV Photovoltaic Solar Panel Measurement Trainer
SKU delorenzo-DL-SOLAR-PV
Educational system for the theoretical and practical study of photovoltaic solar panels. It allows indoor and outdoor experiments to determine and measure the characteristics of different types of photovoltaic panels and their connections: short-circuit current, open-circuit voltage, maximum power point, efficiency, comparison between panel types, and series and parallel connections. It includes connection cables, instruments and an experiment manual.
DL ARM32BIT-HP Open Microprocessor Trainer
SKU delorenzo-DLARM32BIT
Trainer designed to teach the fundamentals of working with a 32-bit industrial microprocessor based on Dual ARM Cortex-A7 and/or Cortex-M4 architecture, ideal for learning software and hardware development for industrial control systems and understanding ARM Cortex microprocessors and their programming. The DL ARM32BIT-HP module goes deeper into the STM32MP1 peripherals and the Linux operating system, supporting Linux C programming experiments, TF-A/Uboot/Linux kernel porting, and LED/key/LCD/IIC/RTC/SPI/RS232/USB/audio/network/ADC/DAC driver experiments under Linux.
DL 1004 Power Supply
SKU delorenzo-DL1004
Power supply designed for electronics laboratories. Its main purpose is to provide a power source with high safety specifications and exceptional electrical performance. The output connection terminals are a non-detachable type, and the outputs are protected by a differential magneto-thermal switch.
DL TM12 Solar Thermal Plant Simulator
SKU delorenzo-DLTM12
Educational system for the theoretical study of solar systems used for domestic hot water, air conditioning and other civil applications. The simulator allows up to six temperature probes at different points in the circuit and a solar-radiation sensor to calculate absorbed energy. It is made up of three operating units: the primary circuit (circulating liquid from the collector that heats the storage tank), the solar thermal collector (with two temperature probes for hot and cold liquid and a light sensor that detects solar radiation), and the secondary domestic-hot-water circuit (with sensors in the tank's hot side, cold side, and water inlet and outlet). Displays and LED bars show the temperature values, and it includes a manual with exercises and solar thermal energy theory.
DL ST033 Beam and Frame Training System with Dynamometers
SKU delorenzo-DLST033
Modular training system for studying theoretical-practical beam and frame assemblies, measuring with two electronic dynamometers and graphically displaying applied force values on a PC. The structure under test is fixed with steel connectors, easily removed with an Allen key. Activities include studying hardware and fastener support, metrology measurement practice, superposition studies, deflection of beams supported at one or two points, frame deformation, and comparing calculated versus measured deformations. It includes U- and V-type portal frame structures, a continuous-beam structure, and two dynamometric gauges with a USB port, plus software and an exercise manual.
DL 13003-02 Mechanical Assembly Practice Training System
SKU delorenzo-DL13003-02
This system lets students evaluate, after each assembly and disassembly, a set of shafts and bearings driven by belts, gears and toothed pulleys, powered by a three-phase motor whose variable speed produces different levels of vibration; vibration intensity is measured on all three axes. Educational activities include pulley and bearing assembly and disassembly, shaft alignment, mechanical-transmission calculations, motor-torque and resistive-torque measurements, energy-efficiency measurements, vibration measurements in three planes at different speeds, and vibration measurements with an inertia disc.
DL 10103TG Single-Phase Transformer
SKU delorenzo-DL-10103TG
Trainer providing an experimental approach to analyzing the behavior and characteristics of a single-phase transformer. It consists of a supply, measurement and load unit, and two transformers. It includes a manual with theoretical and practical sections, and supports 11 experiments: voltage and current transformation ratio, winding polarity, winding resistance measurement, no-load test, short-circuit test, resistive or capacitive load test, efficiency measurement by the direct method, heating test, magnetic field, and hysteresis-loop display.
Request a quote
Tell us which DeLorenzo equipment or reference you need and we'll reply with datasheet, price and availability. Response within one business day. No middlemen.